Introduction to chemical reactor analysis second edition by R.E. Hayes and J.P. Mmbaga pdf download

Introduction to chemical reactor analysis second edition by R.E. Hayes and J.P. Mmbaga.

1 Introduction
2 Thermodynamics of Chemical Reactions
3 Mole Balances in Ideal Reactors
4 Energy Balances in Ideal Reactors
5 Chemical Kinetics for Homogeneous Reactions
6 Nonideal Reactor Analysis
7 Introduction to Catalysis
8 Kinetics of Catalytic Reactions
9 Transport Processes in Catalysis
10 Analysis of Catalytic Reactors 
11 Experimental Methods in Catalysis

About the Book:
This book provides an introduction to the basic concepts of chemical reactor analysis and design. It is aimed at both the senior level undergraduate student in Chemical Engineering and the working professional who may require an understanding of the basics of this area. This book starts with an introduction to the area of chemical reactions, reactor classifications, and transport phenomena, which is followed by a summary of the important concepts in thermodynamics that are used in reactor analysis. This introduction is followed by a detailed development of mole and energy balances in ideal reactors, including multiple reactor systems. A detailed explanation of homogeneous reaction kinetics is then given, including a discussion of experimental techniques in kinetic data analysis. The next chapter describes techniques used in analyzing nonideal reactors, including the residence time distribution and mixing effects. The remainder of the book is devoted to catalytic systems. This latter part of the book contains chapters on the kinetics of catalytic systems, heat and mass transfer effects, and heterogeneous reactor analysis. The final chapter is devoted to experimental methods in catalysis.

Introduction to chemical reactor analysis second edition by R.E. Hayes and J.P. Mmbaga

There are many worked-out examples and case studies presented in the text. Additional problems are given at the back of each chapter.

At the end of reading this book, and working the problems and examples, the reader should have a good basic knowledge sufficient to perform most of the common reaction engineering calculations that are required for the typical practicing engineer.

Preface: It has been about 10 years since the first edition of this book was published, and it is probably appropriate to begin by offering a justification for writing the book initially, and generating a second edition. As noted in the preface to the first edition, there are many good textbooks on chemical reaction engineering in existence. Many of the existing books on chemical reaction engineering are both excellent and comprehensive. (Elements of Chemical Reaction Engineering by Scott Fogler [1999] and Chemical Reaction Engineering by Octave Levenspiel [1999] are both considered classics in the field.) However, it can be this very comprehensiveness that may make them confusing to the neophyte. Most books contain material sufficient for several courses on chemical reaction engineering, although in some books the more complex topics are touched on only lightly. Other texts contain a mix of undergraduate and graduate level material, which can also make it difficult for the beginner in this topic to progress easily. This book, therefore, is not meant to be either comprehensive or complete, nor is it intended to offer a guide to reactor appreciation or give detailed historical perspectives. Rather, it is intended to provide an effective introduction to reactor analysis, and contains sufficient material to be covered in two terms of about 35–50 min lectures each on reactor analysis. At the end of reading this book, and working the problems and examples, the reader should have a good basic knowledge sufficient to perform most of the common reaction engineering calculations that are required for the typical practicing engineer. 

Chemical kinetics and reactor design probably remain as the engineering specialization that separates the chemical engineer from other types of engineer. Detailed mastery of the subject is not, however, essential for the typical chemical engineering graduate at the Bachelor level, because only a few percent of such graduates become involved in research and design careers that involve complex chemical reaction engineering calculations. On the other hand, a significant number of chemical engineers are employed during some stage in their careers with responsibilities involving the operation of a chemical process plant; as process engineers they are expected to provide objective interpretations regarding reactor performance and means of improving its operation. In this regard some training in the area of chemical reaction engineering is essential to enable the understanding of the factors that affect the performance of a chemical reactor, and thus to effect performance-enhancing measures. This book is thus directed to the majority of students who will be generalists, rather than the small minority who will become specialists in the art of reactor design. 

For this, the second edition, the scope of the material has been significantly enhanced. In addition to rearranging the material from the first edition, and the correction of the inevitable errors, five chapters have been added on catalytic reaction engineering. Whereas the first edition was designed for a single course in reaction analysis, and thus focused on homogeneous systems, this edition is designed for two courses in reaction engineering. This book grew from a set of lecture notes in reactor analysis that was used in the senior year undergraduate courses in reaction engineering. As mentioned, it was designed to be used for two courses in reaction analysis. It should be possible to cover all of the material presented in the text in two courses consisting of around 35 lectures, each of 50 min duration, and 10–12 1 h problem-solving periods.

As noted, this textbook is based on the contents of two undergraduate courses in chemical reaction engineering taught in the Department of Chemical and Materials Engineering at the University of Alberta. The students taking these courses have previously taken courses in thermodynamics, numerical methods, heat transfer, and fluid flow. Some knowledge in all of these areas is assumed, and these basics are not discussed in detail, if at all. The exception is thermodynamics of chemical reactions. Because of the importance of this topic to chemical reaction engineering, more than a passing mention is made to this area. It should be noted, however, that the material on chemical reaction thermodynamics is brief, and is intended only to provide a refresher to the student whose knowledge is a bit rusty. Some prior knowledge of kinetics is useful, for understanding the material in this book. 

The order in which the chapters are presented reflects the sequence of the material as presented in the author’s courses in chemical reaction engineering. Some readers may be surprised to see that basic reactor mole balances are discussed prior to the detailed development of kinetics and rate expressions. This choice is deliberate, and reflects the authors’ experience. If simple reactors, especially flow reactors, are introduced early, it tends to eliminate the impression that a reaction rate is defined as the rate of change of concentration with time. This appears to be an artifact from kinetics as taught in many chemistry classes, where only batch reactors are considered. However, Chapter 5 on kinetics does stand on its own, and could probably be taught prior to Chapter 3 if the instructor feels strongly about it. If this book is used for two courses, then it is suggested that the first course covers Chapters 1 through 4, and either Chapter 5 or 6. The second course would then include Chapter 5 or 6 and Chapters 7 through 11. 

Numerical methods are presented in an Appendix. They are essential to the solution of most realistic problems in chemical reaction engineering. There is much good software available on the market today, which makes the solution of the nonlinear problems encountered in CRE relatively straightforward. The reader is expected to have sufficient understanding of numerical methods to be able to solve systems of linear and nonlinear algebraic equations, as well as systems of first-order nonlinear ordinary differential equations. There are many worked out examples presented in the text, as experience has shown that these are one of the most effective learning tools. Additional problems are given at the back of each chapter. 

As this is by design a simple text, and in no way intended to be a comprehensive reference text, suggestions for further reading have been provided. There are many books available, so the student should be able to find one that suits his or her style.

Introduction to Chemical Reactor Analysis, 2nd Edition by R.E. Hayes and J.P. Mmbaga pdf.

Book Details:
⏩Edition:  2nd
⏩Authors: R.E. Hayes and J.P. Mmbaga
⏩Puplisher:  Routledge   
⏩Puplication Date: October 7, 2012 
⏩Language: English
⏩Pages: 562
⏩Size: 12.3 MB
⏩Format: PDF

Download Introduction to chemical reactor analysis second edition by R.E. Hayes and J.P. Mmbaga in pdf format for free.

Scroll to Top