Electrical and Electronic Principles and Technology Third edition By John Bird pdf download

Electrical and Electronic Principles and Technology 3rd Edition By John Bird pdf.

Electrical and Electronic Principles and Technology Third edition By John Bird

The book in PDF Format with title Electrical and Electronic Principles and Technology Third edition By John Bird is available to download for free and Download Link is at the end of the article 

Section 1 Basic Electrical and Electronic Engineering Principles 
1 Units associated with basic electricalquantities 
2 An introduction to electric circuits 
3 Resistance variation
4 Batteries and alternative sources of energy 
Revision Test 1 
5 Series and parallel networks 
6 Capacitors and capacitance
7 Magnetic circuits 
Revision Test 2 
8 Electromagnetism 
9 Electromagnetic induction
10 Electrical measuring instruments and measurements
11 Semiconductor diodes 
12 Transistors
Revision Test 3 
Formulae for basic electrical and electronic
engineering principles

Section 2 Further Electrical and Electronic Principles 
13 D.C. circuit theory 
14 Alternating voltages and currents 
Revision Test 4 
15 Single-phase series a.c. circuits
16 Single-phase parallel a.c. circuits 
17 Filter networks 
18 D.C. transients 
19 Operational amplifiers
Revision Test 5 
Formulae for further electrical and electronic engineering principles 

Section 3 Electrical Power Technology 
20 Three-phase systems 
21 Transformers 
Revision Test 6
22 D.C. machines 
23 Three-phase induction motors
Revision Test 7
Formulae for electrical power technology 
Answers to multiple choice questions  

Preface: Electrical and Electronic Principles and Technology, 3rd Edition introduces the principles which describe the operation of d.c. and a.c. circuits, covering both steady and transient states, and applies these principles to filter networks, operational amplifiers, three-phase supplies, transformers, d.c. machines and three-phase induction motors.

New topics included in this edition are a complete update on semiconductor diodes and transistors, and additional material on batteries, fuel cells and alternative and renewable energies, relative and absolute voltages, self and mutual inductance, virtual test and measuring instruments. In addition, applications in all areas are expanded and emphasised and some new further problems added.

A new feature of this third edition is that a free Internet download (lecturers only) is available of a sample of solutions (some 400) of the 530 further problems contained in the book — see below.

Another new feature is a free Internet download (available for lecturers only) of all 517 illustrations contained in the text — see below.

The third edition of this textbook provides coverage of the following syllabuses:
(i) ‘Electrical and Electronic Principles’ (Unit 5, BTEC National Certificate and National Diploma) — see chapters 1–10, 11(part), 14, 16, 18(part), 21(part), 22(part).
(ii) ‘Further Electrical Principles’ (Unit 67, BTEC National Certificate and National Diploma) — see chapters 13, 15–18, 20, 22 and 23.
(iii) Parts of the following BTEC National units: Electrical Applications, Three Phase Systems, Principles andApplications of Electronic Devices and Circuits, Aircraft Electrical Machines, and Telecommunications Principles.
(iv) Electrical part of ‘Applied Electrical and Mechanical Science for Technicians’ (BTEC First Certificate).
(v) ‘Electrical and Electronic Principles’, Units of the City & Guilds Level 3 Certificate in Engineering (2800).
(vi) ‘Electrical and Electronic Principles’ (Unit ETA/ 009, EAL Advanced Diploma in Engineering and Technology).
(vii) Any introductory/Access/Foundation course involving Electrical and Electronic Engineering Principles.

The text is set out in three main sections:
Section 1, comprising chapters 1 to 12, involves essential Basic Electrical and Electronic Engineering Principles, with chapters on electrical units and quantities, introduction to electric circuits, resistance variation, batteries and alternative sources of energy, series and parallel networks, capacitors and capacitance, magnetic circuits, electromagnetism, electromagnetic induction, electrical measuring instruments and measurements, semiconductor diodes and transistors. Section 2, comprising chapters 13 to 19, involves Further Electrical and Electronic Principles, with chapters on d.c. circuit theorems, alternating voltages and currents, single-phase series and parallel networks, filter networks, d.c. transients and operational amplifiers.

Section 3, comprising chapters 20 to 23, involves Electrical Power Technology, with chapters on threephase systems, transformers, d.c. machines and threephase induction motors. Each topic considered in the text is presented in a way that assumes in the reader little previous knowledge of that topic. Theory is introduced in each chapter by a reasonably brief outline of essential information, definitions, formulae, procedures, etc. The theory is kept to a minimum, for problem solving is extensively used to establish and exemplify the theory. It is intended that readers will gain real understanding through seeing problems solved and then through solving similar problems themselves.

Electrical and Electronic Principles and Technology, 3rd Edition contains 400 worked problems, together with 340 multi-choice questions (with answers at the back of the book). Also included are over 450 short answer questions, the answers for which can be determined from the preceding material in that particular chapter, and some 530 further questions, arranged in 145 Exercises, all with answers, in brackets, immediately following each question; the Exercises appear at regular intervals — every 3 or 4 pages — throughout the text. Over 500 line diagrams further enhance the understanding of the theory. All of the problems — multi-choice, short answer and further questions — mirror practical situations found in electrical and electronic engineering. 

At regular intervals throughout the text are seven Revision Tests to check understanding. For example, Revision Test 1 covers material contained in chapters 1 to 4, Revision Test 2 covers the material contained in chapters 5 to 7, and so on. These Revision Tests do not have answers given since it is envisaged that lecturers/instructors could set the Tests for students to attempt as part of their course structure. Lecturers/instructors may obtain a free Internet download of full solutions of the Revision Tests in an Instructor’s Manual — see below.

I am very grateful to Mike Tooley for his help in updating chapters on Semiconductor diodes, Transistors, and Measuring instruments and measurements. A list of relevant formulae is included at the end of each of the three sections of the book. ‘Learning by Example’ is at the heart of Electrical and Electronic Principles and Technology, 3rd Edition.
John Bird
Royal Naval School of Marine Engineering
HMS Sultan
formerly University of Portsmouth and Highbury
College Portsmouth

Electrical and Electronic Principles and Technology Third edition By John Bird pdf.

Book Details:
⏩Edition: 3rd
⏩Author: John Bird
⏩Publisher: Newnes; 3 edition (October 1, 2007)
⏩Puplication Date: October 1, 2007
⏩Language: English
⏩Pages: 422
⏩Size: 6.50 MB
⏩Format: PDF

👇 Related books which you can also download, just click on a book you like to download it:

👇👇Downloading The Book👇👇

Download Electrical and Electronic Principles and Technology, Third Edition 3rd Edition by Bird BSc (Hons) CEng CMath CSci FIET MIEE FIIE FIMA FCollT, John in pdf format for free.

Scroll to Top